The Stanford on Avon Story.

St. Nicholas’ Church, Stanford on Avon is in fact a Leicestershire Diocese Church but actually located on the Northamptonshire side of the River Avon border with Leicestershire.
It is, a L.D.G.C.B.R. Market Harborough Branch tower, therefore fitting neatly within our Upper Avon Valley Bells webpages.
Although not exactly uncommon, the five bells are so configured within their wooden framework, to render an anti-clockwise rope drop.

Upon succession of a newly appointed tower captain, (who coincidently, is also a member of the Guilsborough Branch) in conjunction with the local ringers, unanimously decided to re-inspect the installation as increasing ringing difficulties were being experienced. This is not to say the installation was previously neglected but there were still numerous outstanding issues to be addressed to return the five bells & fittings etc to an acceptable standard.We were previously informed of at least four weddings to take place later in the year, so commencing May 2017, the initial inspection process took place. Itemising the remedial actions is probably the best way to explain what we found & subsequently repaired, replaced or maintained.

1. Sort, re-attach or repair all of the numerous fallen wheel shroud sections, using stainless steel fixing screws. Also, add more fixing screws to strengthen the remainder of the loose shrouds, which were about to drop off.
2. Remove, inspect, grease, refurbish & re-tighten all five of the crown staple / clapper / headstock interface hardware arrangements. Refit with new leather washers where necessary.
3. Inspect & top up gudgeon bearing grease caps.
4. Inspect ground pulley blocks and bearings for wear & tear, top up grease cups. No.4 ground pulley removed for further remedial work, temporarily replaced with redundant ground pulley from Welford tower.
5. Replace missing stay fixing hardware.
6. Add new rope bosses to bell chamber floor interface in order to reduce friction on ropes, which were cutting through the floor.
7. Adjust rope lengths & untwist tails.
8. Sweep all floors & spiral stairway.
9. Add new “bells raised” etc warning signs & bell data information.

Upon test ringing of the bells, as hopefully expected, we all immediately realised the work done has considerably enhanced the smoother running of the installation. It is now an extremely pleasurable exercise to ring at Stanford on Avon.

At the end of the day the excellent tonal qualities of three Gillett & Johnston plus two Hugh II Watts bells, emitted from the tower remains the same.

(…… to be continued)

Advertisements